Life is Feudal Official Forum

[Koreno.gamer]

I am soooo consuded... I edited my post to include my mais.cs file

[Custodian]

I am soooo consuded... I edited my post to include my mais.cs file

Verify, that you uploaded required files to your server, and not client, i.e. full path should be like

Code: Select all

"Life is Feudal Your Own Dedicated Server\BasilMod\teleport\teleport.cs.dso"


[Koreno.gamer]

I am soooo consuded... I edited my post to include my mais.cs file

Verify, that you uploaded required files to your server, and not client, i.e. full path should be like

Code: Select all

"Life is Feudal Your Own Dedicated Server\BasilMod\teleport\teleport.cs.dso"


I use Bluefang. I opened the file manager, added the BasilMod Folder. Added teleport folder inside BasilMod folder. and put the 2 tiles inside the teleport folder

[Koreno.gamer]

Here is the place I put the folders

[Custodian]

I use Bluefang. I opened the file manager, added the BasilMod Folder. Added teleport folder inside BasilMod folder. and put the 2 tiles inside the teleport folder

Your setup seems to be valid.
Make sure you are typing commands in server console, and check your server log file, to verify that mod is loaded from your main.cs file (or share your log with me).

[Koreno.gamer]

I found these lines in the latest log file from the logs folders

Spoiler

BasilMod/teleport/config.cs Line: 51 - syntax error
WARN 2017-09-11 04:49:43.970 {} <> [0] >>> Advanced script error report. Line 51.
WARN 2017-09-11 04:49:43.970 {} <> [0] >>> Some error context, with ## on sides of error halt:
ERRR 2017-09-11 04:49:43.970 {} <> [0]
BasilMod::teleport_register("\n\nTeleporting to GM Isle!", 3, "1049 65 0", 1, 117302941);^//Register new teleport

BasilMod::teleport_register("\n\nTeleporting to MainLand!", 3, "1650 -41 0", 1, 117318659); //Register new teleport

*/



Teleport registration;

##B##asilMod::teleport_register(

^"Teleporting to GM Base",^//Message to be shown prior to teleportation. "\n" is line separation. Message is center aligned. 4 lines allowed.

^3, ^^^^^^^^//Timeout, how long you should stay on the teleport. If you step out, you will evade teleportation
WARN 2017-09-11 04:49:43.970 {} <> [0] >>> Error report complete.

ECHO 2017-09-11 04:49:43.970 {} <> [0] BasilMod::teleport v5 loaded

[Custodian]

I found these lines in the latest log file from the logs folders

BasilMod/teleport/config.cs Line: 51 - syntax error

You have syntax errors in your mod config.cs file, so it is not loaded.

[Koreno.gamer]

The only change I made was I copied the section in your example to the bottom.

Here is my config file.

Spoiler

/*
BasilMod::Teleport plugin.
2015 Basil Semuonov

Usage.

Installation
1) Place this file (config.cs) and (teleport.cs.dso) to folder "BasilMod/teleport/" of server root.
2) add this line to the end of file "main.cs" of the server:
exec("BasilMod/teleport/teleport.cs");
3) Fill configuration file with info
4) Start server

Configuration
1) Register teleports with command BasilMod::teleport_register, options explained below.
2) Start server.
3) If configuration is changed, you can reload config by executing this command at server:
exec("BasilMod/teleport/teleport.cs");

Available variables at config file:
1) $BasilMod::teleport::show_coords = false; - enable display of current coords on server startup
2) $BasilMod::teleport::enable = true; - enable teleports by default on server startup

Teleport registration;
BasilMod::teleport_register(
"Teleporting to GM Isle...", //Message to be shown prior to teleportation. "\n" is line separation. Message is center aligned. 4 lines allowed.
3, //Timeout, how long you should stay on the teleport. If you step out, you will evade teleportation
"1049 74 0", //Coordinates of source point. "X Y Z". Coords can be negative. To get coords, enable "show_coords" option, and write them done, while you are in GM mode.
1, //Radius of source point for activating teleportation.
117318659 //Target GeoID. You can get info from database, or from server console.
);

Available function from the server console:
1) BasilMod::teleport_enable(); - enable all registered teleports
2) BasilMod::teleport_disable(); - disable all registered teleports
3) BasilMod::teleport_showCoords(); - enable display of current coords for active GM characters
4) BasilMod::teleport_hideCoords(); - disable display of current coords for active GM characters

*/

$BasilMod::teleport::show_coords = false; //Show coords hint message for GM characters
$BasilMod::teleport::enable = True; //Enable on server startup

/*
//example teleports
BasilMod::teleport_register("\n\nTeleporting back to chest!", 3, "1049 74 0", 1, 117318659); //Register new teleport
BasilMod::teleport_register("\n\nTeleporting to GM Isle!", 3, "1049 65 0", 1, 117302941); //Register new teleport
BasilMod::teleport_register("\n\nTeleporting to MainLand!", 3, "1650 -41 0", 1, 117318659); //Register new teleport
*/

Teleport registration;
BasilMod::teleport_register(
"Teleporting to GM Isle...", //Message to be shown prior to teleportation. "\n" is line separation. Message is center aligned. 4 lines allowed.
3, //Timeout, how long you should stay on the teleport. If you step out, you will evade teleportation
"1049 74 0", //Coordinates of source point. "X Y Z". Coords can be negative. To get coords, enable "show_coords" option, and write them done, while you are in GM mode.
1, //Radius of source point for activating teleportation.
117318659 //Target GeoID. You can get info from database, or from server console.
);

[Koreno.gamer]

OK... I removed the line...

Teleport registration;

restarting now to see what happens

[Koreno.gamer]

After removing the line.... This is the only occurance of the word teleport in the log file...

ECHO 2017-09-11 18:39:31.985 {} <> [0] BasilMod::teleport v5 loaded

Hope it works now.

[Koreno.gamer]

Also... When you say "server console", do you mean the game console on my bluefang dashboard?

When I use the command BasilMod::teleport_showCoords(); there I get nothing. no messages in game, no messages anywhere. nothing happens

[Koreno.gamer]

Well,

The log says the mod is loaded. But I can not get anything to work. Cant figure out how to get coords first of all.

I am in GM mode and when I use the command BasilMod::teleport_showCoords() either in the console at bluefang I get nothing. No messages no errors, nothing. no idea if anything is happening.

When I use it ingame in the console from hitting ctrl ~ I get a message unable to find function BasilMod::teleport_showCoords()

My config options are set as follows....
$BasilMod::teleport::show_coords = True; //Show coords hint message for GM characters
$BasilMod::teleport::enable = True; //Enable on server startup

Since I cant figure out how to use any commands I used the following like to make a teleport and then restarted the server.
BasilMod::teleport_register("\n\nTeleporting back to chest!", 3, 116114941, 1, 116657659); //Register new teleport

It didnt work.

[Custodian]

I am in GM mode and when I use the command BasilMod::teleport_showCoords() either in the console at bluefang I get nothing. No messages no errors, nothing. no idea if anything is happening.

Command is "BasilMod::teleport_showCoords();" (omit quotes).
I have no idea how bluefang web-console works, or does it allow you to execute any server commands. Ask your hosting support for the help.

When I use it ingame in the console from hitting ctrl ~ I get a message unable to find function BasilMod::teleport_showCoords()

This is not server console, this is client console.

It didnt work.

This happed because you used geoid, while you need to use in-game coords.

[Koreno.gamer]

OK, well until I can figure out how to get the coords this mod is useless. Maybe I can find another mod that gives me coords on demand or constant on minimap or something.

[Koreno.gamer]

Actually..

I have this in my config...

$BasilMod::teleport::show_coords = True; //Show coords hint message for GM characters

Isnt that supposed to make it so whenever I go into GM mode it just gives me my Coords?

[Koreno.gamer]

I found this post...
https://www.reddit.com/r/LifeIsFeudal/comments/2snunv/how_to_translate_geodataid_to_xy/

I ran this query...
CALL f_fromGeoID(116268220);

and got this result...
TerID: 443
X: 188
Y: 270

Is there a way to get the coords from that?

[Koreno.gamer]

OK, I think I figured out that the map is 1536 by 1536.

Where is 0, 0? Top left corner? Bottom left corner?

Edit: Since TerID 443 is the bottom middle quadrant, and each quadrant is 512x512 tiles, I did a little math and made my coords 700, 270, 0.

Restarted the server to update the teleports and still nothing.

Both options in the config are set to True.

[Koreno.gamer]

A thought... Do I need any of your other mods to make this one work?

[Custodian]

A thought... Do I need any of your other mods to make this one work?

No, you dont.
You can use build-in function to enable current coords display for GMs.

[Kyle.thompson446]

BasilMod::teleport_register("Teleporting to City!", 3, "-473 -2405 1057", 2, 116895660);

IS THIS THE CORRECT LINE?? IVE DONE EVERYTHING I CAN THINK OF AND CANT GET IT TO WORK. I GET THE MISSING FILES READ TO.. I HAVE NO IDEA WHAT IM DOING WRONG IVE FOLLOWED THE INSTRUCTIONS

[Urias.bephet]

Hi,
When i use coords as a target, they are not recognize by the mod, however it work with the geoid. Is something has changed between the versions, cause it was supposed to work with coords with V3 and 4.
My problem is that the geoid teleport underwater (using a cog as a destination).

[TheSavior]

Hi everybody!
I saw that a lot of people can be a bit confused about editing the config file (i was too).
So here is an example of the one i use on my server:

https://i.imgur.com/wr2sO0u.png

The tricky part was to delete:

/*
//example teleports
BasilMod::teleport_register("\n\nTeleporting back to chest!", 3, "1049 74 0", 1, 117318659); //Register new teleport
BasilMod::teleport_register("\n\nTeleporting to GM Isle!", 3, "1049 65 0", 1, 117302941); //Register new teleport
BasilMod::teleport_register("\n\nTeleporting to MainLand!", 3, "1650 -41 0", 1, 117318659); //Register new teleport
*/

and replace it by your own coordinates

just follow my config file and you'll be good to go!


ps: exec("BasilMod/teleport/teleport.cs"); doesn't work on my server console so if it's your case too you have to restart your server.