Life is Feudal Official Forum

[Gobur]

It seems that I can´t make an anvil in 100Q.
I have checked everything and it is 100Q or 100% durability. I´ve tried with both bloomery and blacksmith and I only get a 99Q Anvil. What do I have to do get 100Q anvil? (Ofcause I have 100% in all blacksmithing skills.)

[Airco]

materials and construction tool also have to be 100Q

[Gobur]

It is, that is the problem and by the way the blacksmith is over 19500 in durabitlty.

[Veda]

Don't remember if I had a 100Q anvil but, if it can help you, I noticed that it's impossible to have 100Q thick/thin leather. I think there is a little bug with the quality (after 0.XX maybe).

I had
- my skill at 100
- hammer 100Q
- materials 100 (boards, nails and glue)
- even the ground at 100

And i got a 99 or 98 leather.

[Goltis]

Slightly off topic, but how do you see the Quality of buildings like Kiln etc?
Do you just check if the durability is max?
Any place where i can look up max durability?

Also, if you say you have a 100% dura Blacksmith shop, doesnt that mean you already made a 100Q anvil for that?

[Veda]

If you have a building of max durability (20k) it means you built it with the best materials (and skills & tools).

For see the durabilty right clic, inspect building.

For the BS shop no, 'cause all the "shops" give you a bonus on your craft (don't remember how many). Even the outfit. And if you have a jewel wich gives you a lucky bonus.

So for example you are 100 on forging, you treat a bad iron ore in the BS shop, you can have easily tools 100Q.

But i'm pretty sure there is a bug in the quality system. I noticed last time with the same iron ore and handles I had diffrets Q tools...

[Khan-]

veda did you have rings, amulet or luck bonus ?

[Veda]

Never had yet.

[Gobur]

Oki, thanks all...

[Veda]

All right folks !

Here are the facts

1/ I built a furnace Q100 (with fibers, clay, and water Q100) on a ground Q100 (if there is an influence or somethin else.

2/ I treated 400 iron ore of Q100 = 1ingot of 100 and 19 of 99 (the durability is in cause). After, I treated 400 iron ore of Q50, and i got 20 ingots of Q64.

3/ I made 2 clay anvil forms with Q100 and Q50 materials and I got one of 100 and the other 70.

4/ And I finally crafted 2 anvils one of 71 and the other of 98.

I can not make better. We have the same problem with leathers. I also don't know why I don't have a better anvil with a form of Q70. I got 1 point more ...

In my opinion, there is definitively a problem with the quality.

Veda

[Ziong18]

Build blacksmith shop and kiln out of 100q materials using a mallet (100q of course) on top of 100q soil - will maximize quality output

build tanning rack and tub on top of 100q soil using a mallet but DO NOT pick either of them up, use them in that spot to start with 100q hides

[Veda]

Already did, the same result.

[Khan-]

maybe it's normal... as the fertilize with dung, even with 100 skill and dung Q100... you cannot reach beter that 96... the game is coded like that.. maybe it's planned to be as it is, because of luck and job clothes... like blacksmith clothes, monk, carpenter etc... that gives a huge bonus, as the craft building etc..

[Thefakemccoy]

even if you get a 99Q anvil and make a black smith shop with the rest of the items at 100Q you get a 20% quality bonus. SO if your black smith shop it self only turned out to be a 99Q it should make high quality items this will also depend on quality of materials and tools as well.

Also as you use the shops the durability goes down which drops the quality of the items you make as well